Browsing articles tagged with " Mesin Cutting Sticker"

Mesin Cutting Sticker Graphtec CE6000-60

Mar 16, 2014   //   by Deutzy   //   Graphtec, Mesin Cutting Sticker, Product  //  1 Comment

Mesin cutting sticker terbaru dari Graphtec sebagai pengganti dari mesin cutting sticker CE5000 yang sudah tidak diproduksi lagi, mesin ini lebih cepat dari seri sebelumnya dan juga lebih akurat hasil potongnya, bentuk fisik mesin cutting sticker ini juga lebih modern.

Namun mesin cutting sticker seri CE6000 sudah di assembly di China, akan tetapi kemampuannya tidak berkurang dan justru lebih baik dari seri CE5000. Dapat digunakan langsung melalui CorelDraw ataupun Adobe Illustrator, dan bisa dgunakan melalui CPU ataupun laptop karena hanya membutuhkan/menggunakan kabel USB.

Spesifikasi mesin cutting sticker ini:

• CPU – 32-bit CPU
• Configuration – Microgrit Rollers, moving media
• Drive System – Digital Servo Motor
• Maximum cutting area – 23.7 in x 164 ft (603 mm x 50 m)
• Compatible Media width – Min: 2 in (50 mm) Max: 28.0 in (712 mm)
• Maximum Media thickness – 10 mils (0.25 mm)
• Maximum Cutting speed – 35 in/s (900 mm/s) @ 45˚direction
• Cutting Speeds – 1-10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60 cm/s
• Programmable Cutting Force – (20 gf to 300 gf) (31 levels)
• Minimum character size – Approx. 20 point, 0.196 inches (5 mm) for alphanumeric characters (depends on the medium, font, etc.)
• Mechanical resolution – 0.0002 in (0.005 mm)
• Programmable resolution – GP-GL: 0.01, 0.025, 0.05, 0.1 mm HP-GL: 0.025 mm
• Repeatable Precision – 0.1 mm or less per 2 m (*1 Using Graphtec recommended media and appropriate cutting conditions.)
• No. of Tools mountable – 1 – blade or pen
• Compatible Cutter type – Graphtec SuperSteel blades, 0.9mm and 1.5mm diameter.
• Compatible Pen type – Graphtec Water-based fiber-tip pens
• Compatible Media – Vinyl film, fluorescent, decal, light reflective (except high-luminosity), paint masking, banner, thermal transfer vinyl, flex, flock, image transfer media, vinyl print media, etc.
• Interface – Serial RS-232C / USB 2.0 High Speed
• Command modes – GP-GL, HP-GL (selectable in Command menu)
• Display panel -0020 – Graphic LCD with backlight (240 dots x 128 dots). Supports 10 languages
• Operating Environment – 50 ~ 95˚F (10 ~ 35˚C) 35 ~ 75% RH (non-condensing)
• Recommended Environment – 61 ~ 80˚F (16 ~ 32˚C) 35 ~ 70% RH (non-condensing)

Mesin cutting sticker Graphtec CE6000-60

Harga Rp. 19 juta
Belum termasuk stand/kaki.

Garansi mesin cutting sticker ini selama 1 tahun termasuk spare parts, namun yang TIDAK digaransi adalah parts consumable seperti mata pisau, blade holder, dll.

Mesin Cutting Sticker Mimaki CG 60 SRIII

Mar 15, 2014   //   by Deutzy   //   Mesin Cutting Sticker, Mimaki, Product  //  1 Comment

Seri terbaru dari mesin cutting sticker Mimaki, ini adalah versi upgrade dari mesin cutting sticker Mimaki CG 60 SRII, banyak kelebihan dari mesin ini dibandingkan dengan seri sebelumnya.

Keepatan potong dari mesin ini juga lebih baik dari yang sebelumnya, termasuk soal akurasi potongnya. Berikut adalah spesifikasi dari mesin cutting sticker ini:

  • Wider Roll cutting format for professional use
  • Stunning value & highly competitive performance
  • 3 different cutting widths available (606/1070/1370 mm)
  • Up to 70 cm/s cutting speed
  • Fast and accurate contour cutting
  • Best-in-class cutting pressure of up to 500g
  • Half-cut function holds image in place after cutting for perfect stickers and decals

Mimaki CG 60 SRIII

Item

CG-60SRIII

CG-100SRIII

CG-130SRIII

Acceptable sheet width

90~740 mm

90~1,250 mm

90~1,550 mm

Effective cutting area

606 mm

1,070 mm

1.370 mm

Maximum speed

Cutting: 70 cm/s, Moving: 100 cm/s

Adjustable speed range

1 – 10 cm/s (1 cm/s step adjustment), 1 – 70 cm/s (5 cm/s step adjustment)

Mechanical resolution

X direction: 2.5 μmˎY direction: 5 μm

Command resolution

25 μm or 10μm (MGL-IIc) / 100 μm, 50 μm (MGL-Ic1)

Repeatability*1

± 0.2 mm / 2 M

Effective Repeatability*2

586 mm × 2 M

1,050 mm × 2M

1.350 mm × 2M

Maximum pressure

500g

Range ofdown pressure Cutter

10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 500g(10g step)

Pen

10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 150g(10 g step)

Acceptable sheet*2

Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet

Acceptable tool*3

Cutter, Ball-point pen

Type of command

MGL-IIC / MGL-Ic1

Interface

USB2.0ˎRS-232CˎEthernet

Receiver buffer size

27 MB Standard (When sorting, 17 MB)

Operational environment

5 – 35 ºC, 35 – 75 %(Rh), Non-condensation

Power requirement

AC 100 V – 240 V, 145 VA or less

Dimensions (W x D x H)

1,030 × 430 × 335 mm

(1,030 × 430 × 1,185 mm)*4

1,530 × 580 × 1,150 mm

1,830 × 580 × 1,150 mm

Weight

24kg

41kg

46kg

Stand

Optional equipment

Standard equipment

Standard equipment

Harga: Rp. 19,5 juta. (belum termasuk ongkos kirim).

Daftar Harga Mesin Cutting Sticker

Jan 12, 2013   //   by Deutzy   //   Info  //  1 Comment

Berikut adalah daftar harga mesin cutting sticker yang kami sediakan:

Roland Stika SV-15 (35 cm) Rp. 11 juta (Tidak di import lagi)
Roland Servo GX24 (58,4 cm) Rp. 20,5 juta
Roland Servo GX300 (100 cm) Rp. 33 juta
Roland Servo GX500 (119 cm) Rp. 45 juta

Graphtec CE5000-60 (61 cm) Rp. 18 juta : DISCONTINUE
Graphtec CE5000-120 (121 cm) Rp. 39 juta : DISCONTINUE
Graphtec CE6000-60 (60 cm) Rp. 19 juta

Mimaki CG 60SR (60 cm) Rp. 18 juta : DISCONTINUE
Mimaki CG 130SR (136 cm) Rp. 35 juta : DISCONTINUE
Mimaki CG 60SR III (60 cm) Rp. 19 juta
Mimaki CG 130SR III (130 cm) Rp. 39 juta

Silhouette CAMEO (30 cm) Rp. 6 juta

Redsail RS 800C (70 cm) Rp. 7 juta
Redsail RS 1360C (120 cm) Rp. 9 juta

Copam CP2500 (60 cm) Rp. 10 juta (tidak di import lagi)

Semua mesin bergaransi resmi selama 1 tahun termasuk spare parts, KECUALI Redsail hanya bergaransi servis.

*UPDATE per-12 April 2014

Mesin Cutting Sticker Silhouette Cameo

Feb 19, 2012   //   by Deutzy   //   Mesin Cutting Sticker, Product, Silhouette  //  8 Comments

Mungkin banyak dari anda yang belum mengenal mesin cutting sticker Silhouette Cameo, mesin ini merupakan buatan Silhouette, US. Namun mesin cutting sticker ini di assembly di China, seperti halnya beberapa mesin cutting sticker lain, namun tanpa menghilangkan kualitas dari mesin ini.

Silhouette Cameo merupakan saudara dari mesin cutting sticker Graphtec Craft ROBO, namun mesin ini memiliki ukuran lebar area potong yang lebih besar yaitu 30 cm. Mata pisau yang digunakan sama dengan Craft ROBO, tetapi softwarenya berbeda, Silhouette Studio® software tidak dapat dijalankan langsung melalui CorelDraw ataupun Adobe Illustrator, tetapi anda tetap dapat membuat gambar pada kedua software tersebut lalu mengekspornya pada Silhouette Studio® software.

Hasil potongan dari mesin cutting sticker Silhouette Cameo sangat bagus seperti halnya Craft ROBO, dan mesin ini mudah di operasikan. Jaminan garansi dari mesin ini selama 1 tahun.

Yang didapatkan dalam pembelian mesin cutting sticker Silhouette Cameo:

  • Silhouette electronic cutting tool
  • Silhouette Studio® software for Windows XP/Vista/7 and Mac® OS X 10.5.8 and higher
  • 51 exclusive cuttable designs
  • Power cable, USB cable
  • 12″ cutting mat
  • Cutting blade
  • $10 gift card to the Silhouette Online Store
  • Basic Instruction Guide

Harga Rp. 6 juta.

Minat dengan Mesin Cutting Sticker Silhouette Cameo ini bisa menghubungi Agung – 082260017989.

———————————————————-

Untuk mata pisau CAMEO hanya dijual kepada customer kami, berhubung banyaknya seller yang menjual mesin ini dengan mengimport sendiri (tidak melalui importir resmi). Jadi mohon maaf apabila ada yang bertanya tentang mata pisau, spare parts, dan lainnya yang berhubungan dengan mesin ini tidak kami layani apabila pembelian tidak melalui kami.

Terima Kasih.

Roland CAMM Servo Series

Feb 12, 2012   //   by Deutzy   //   Mesin Cutting Sticker, Product, Roland  //  1 Comment

Mesin cutting sticker Roland CAMM Servo Series, terdapat beberapa ukuran yang lebih besar dari GX-24. Mesin cutting sticker Roland CAMM Series terbagi menjadi ukuran 73 cm, 1 m (not available), 1,19 m, 1,5 m.

Spesifikasinya:

MODEL GX-640 GX-500 GX-400 GX-300
Mechanism/
Driving method
Friction feed/Digital control servo motor
Maximum
cutting area
Width: 1575 mm (62 in.)
Extend: 1626 mm (64 in.)
Length: 24998 mm (984-1/8 in.)
Width: 1195 mm (47 in.)
Length: 24998 mm (984-1/8 in.)
Width: 1000 mm (39 in.)
Length: 24998 mm (984-1/8 in.)
Width: 737 mm (29 in.)
Length: 24998 mm (984-1/8 in.)
Acceptable
media widths
Min. 130 mm (5-1/16 in.)
Max. 1842 mm (72-1/2 in.)
Min. 90 mm (3-1/2 in.)
Max. 1372 mm (54 in.)
Min. 90 mm (3-1/2 in.)
Max. 1178 mm (46 in.)
Min. 50 mm (2 in.)
/Max. 915 mm (36 in.)
(50 to 540 mm (2 in. to 21 in.), 582 to 915 mm (23 in. to 36 in.))
Width of material that can be cut off 0 to 1778 mm
(0 in. to 70 in.)
0 to 1270 mm
(0 in. to 50 in.)
0 to 1067 mm
(0 in. to 42 in.)
0 to 812 mm
(0 in. to 32 in.)
Tools Special blade for CAMM-1 series
Maximum
cutting speed
During cutting: 850 mm/sec. (in all directions) During tool-up: 1202 mm/sec. (in 45 direction)
Cutting speed/Brade force 10 to 850 mm/sec. (in increments of 10 mm/sec.)/20 to 350 gf
Mechanical resolution 0.0035 mm/step (0.000137 in./step) 0.0125 mm/step (0.000492 in./step)
Software resolution 0.025 mm/step (0.000984 in./step)
Distance accuracy*1 Error of less than 0.2% of distance traveled, or 0.1 mm (0.00394 in.), which is greater
Repetition accuracy*1*2*3 0.1 mm or less
Interface Serial (RS-232C-compatible), USB (Rev 1.1)
Replot memory 2 MB (buffer size: 8 MB)
Power supply/Power consumption AC 100V to 240V ±10% 50/60Hz 1.2A/Approx. 100W AC 100V to 240V ±10% 50/60Hz 1.1A/Approx. 95W
Dimensions with stand 2155 (W) x 727 (D) x 1113 (H) mm
(83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in.)
1602 (W) x 727 (D) x 1113 (H) mm
63-1/16 (W) x 28-5/8 (D) x 43-13/16 (H) in.)
1407 (W) x 727 (D) x 1113 (H) mm
(55-3/8 (W) x 28-5/8 (D) x 43-13/16 (H) in.)
1144 (W) x 727 (D) x 1113 (H) mm
(45-1/16 (W) x 28-5/8 (D) x 43-13/16 (H) in.)
Weight with stand 64 kg (141.1 lb) 55 kg (121.2 lb) 51 kg (112.4 lb) 44 kg (97 lb)
Operating temperature 5 to 40°C (41 to 104°F)
Operating humidity 35% to 80% (non-condensing)
Included items Power cord, blade holder (XD-CH2), pin, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user’s manual

Harga:

CAMM Servo GX-300 Rp. 38,5 juta

CAMM Servo GX-500 Rp. 47 juta

CAMM Servo GX-640 Rp. 75 juta

Minat atau ingin melihat demo dari mesin cutting sticker Roland CAMM Servo Series bisa menghubungi Agung – 02190338818 / 082260017989.

Mesin Cutting Sticker Roland Stika SV-15

Feb 12, 2012   //   by Deutzy   //   Mesin Cutting Sticker, Product, Roland  //  3 Comments

Mesin cutting sticker Roland Stika SV-15, mesin ukuran kecil dengan kemampuan besar, sedikit lebih besar diatas mesin cutting sticker Roland Stika SV-12.

Spesifikasinya:

MODEL
SV-15
SV-12
SV-8
Cutting method
Media-movement method
Maximum cutting area
13-3/8 (X) x 39-5/16” (Y) [340 (X) x 1000mm (Y)]
9-13/16 (X) x 39-5/16” (Y) [250 (X) x 1000mm (Y)]
6-1/4 (X) x 39-5/16” (Y) [160 (X) x 1000mm (Y)]
Acceptable sheet size*
Width: 14-1/8 to 15” (360 to 381 mm)
Width: 11 to 12” (280 to 305mm) Length: 43-1/4” (1100mm) or less
Width: 11 to 12” (280 to 305mm) Length: 43-1/4” (1100mm) or less
Width: 7-13/16 to 8-7/16” (200 to 215mm) Length: 43-1/4” (1100mm) or less
Cutting speed
7/16 to 3-7/8ips. (12 to 100 mm/sec.)
7/16 to 1-9/16ips (12 to 40 mm/sec.)
7/16 to 1-9/16ips (12 to 40 mm/sec.)
Acceptable material
PVC or label material of 0.004” (0.1 mm) or less in thickness. Total material thickness including the backing of 0.012” (0.3 mm) or less
Interface**
USB 1.1
Power supply
Dedicated AC adapter input: AC 100V +/- 10%, 50/60Hz 1.7A Output: DC 19 V 2.1 A
External dimensions
20-5/8(W) x 8-1/8(D) x 4-1/2”(H) [522(W) x 205(D) x 115(H)mm]
17-3/8(W) x 8-1/8(D) x 4-1/2”(H) [440(W) x 205(D) x 115(H)mm]
13-3/8(W) x 8-1/8(D) x 4-1/2”(H) [340(W) x 205(D) x 115(H)mm]
Power consumption
Aprox. 20W (including AC adapter)
Weight (unit only)
7.3 lb [3.3 kg]
6 lb. [2.7 kg]
4.9 lb. [2.2kg]
Acoustic noise level
60 dB (A) or less (According to ISO 7779)
Operating environment
Temperature: 41 to 104 °F [5 to 40 °C] Humidity: 35 to 80% non-condensing
Included items
AC adapter, power cord, USB cable, replaceable blade protector, blade, blade holder, pin, material for test cuts, application tape for test cuts, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10, 11,12 and Adobe Illustrator 9, 10, CS, Stika Windows Navi utility), SV-15/12/8 user’s manual

Harga Rp. 11 juta.

Minat atau ingin melihat demo mesin cutting sticker roland stika sv-15 bisa menghubungi Agung – 082260017989.

Pages:123»
UA-18263540-1