Roland CAMM Servo Series

Posted by Deutzy | CAMM Servo Series,Roland | Sunday 12 February 2012 13:53

Mesin cutting sticker Roland CAMM Servo Series, terdapat beberapa ukuran yang lebih besar dari GX-24. Mesin cutting sticker Roland CAMM Series terbagi menjadi ukuran 73 cm, 1 m (not available), 1,19 m, 1,5 m.

Spesifikasinya:

MODEL GX-640 GX-500 GX-400 GX-300
Mechanism/
Driving method		 Friction feed/Digital control servo motor
Maximum
cutting area		 Width: 1575 mm (62 in.)
Extend: 1626 mm (64 in.)
Length: 24998 mm (984-1/8 in.)		 Width: 1195 mm (47 in.)
Length: 24998 mm (984-1/8 in.)		 Width: 1000 mm (39 in.)
Length: 24998 mm (984-1/8 in.)		 Width: 737 mm (29 in.)
Length: 24998 mm (984-1/8 in.)
Acceptable
media widths		 Min. 130 mm (5-1/16 in.)
Max. 1842 mm (72-1/2 in.)		 Min. 90 mm (3-1/2 in.)
Max. 1372 mm (54 in.)		 Min. 90 mm (3-1/2 in.)
Max. 1178 mm (46 in.)		 Min. 50 mm (2 in.)
/Max. 915 mm (36 in.)
(50 to 540 mm (2 in. to 21 in.), 582 to 915 mm (23 in. to 36 in.))
Width of material that can be cut off 0 to 1778 mm
(0 in. to 70 in.)		 0 to 1270 mm
(0 in. to 50 in.)		 0 to 1067 mm
(0 in. to 42 in.)		 0 to 812 mm
(0 in. to 32 in.)
Tools Special blade for CAMM-1 series
Maximum
cutting speed		 During cutting: 850 mm/sec. (in all directions) During tool-up: 1202 mm/sec. (in 45 direction)
Cutting speed/Brade force 10 to 850 mm/sec. (in increments of 10 mm/sec.)/20 to 350 gf
Mechanical resolution 0.0035 mm/step (0.000137 in./step) 0.0125 mm/step (0.000492 in./step)
Software resolution 0.025 mm/step (0.000984 in./step)
Distance accuracy*1 Error of less than 0.2% of distance traveled, or 0.1 mm (0.00394 in.), which is greater
Repetition accuracy*1*2*3 0.1 mm or less
Interface Serial (RS-232C-compatible), USB (Rev 1.1)
Replot memory 2 MB (buffer size: 8 MB)
Power supply/Power consumption AC 100V to 240V ±10% 50/60Hz 1.2A/Approx. 100W AC 100V to 240V ±10% 50/60Hz 1.1A/Approx. 95W
Dimensions with stand 2155 (W) x 727 (D) x 1113 (H) mm
(83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in.)		 1602 (W) x 727 (D) x 1113 (H) mm
63-1/16 (W) x 28-5/8 (D) x 43-13/16 (H) in.)		 1407 (W) x 727 (D) x 1113 (H) mm
(55-3/8 (W) x 28-5/8 (D) x 43-13/16 (H) in.)		 1144 (W) x 727 (D) x 1113 (H) mm
(45-1/16 (W) x 28-5/8 (D) x 43-13/16 (H) in.)
Weight with stand 64 kg (141.1 lb) 55 kg (121.2 lb) 51 kg (112.4 lb) 44 kg (97 lb)
Operating temperature 5 to 40°C (41 to 104°F)
Operating humidity 35% to 80% (non-condensing)
Included items Power cord, blade holder (XD-CH2), pin, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user’s manual

Harga:

CAMM Servo GX-300 Rp. 33 juta

CAMM Servo GX-500 Rp. 45 juta

CAMM Servo GX-640 Rp. 70 juta

Minat atau ingin melihat demo dari mesin cutting sticker Roland CAMM Servo Series bisa menghubungi Agung – 02190338818 / 087775123351.

Share

Mesin Cutting Sticker Roland Stika SV-25

Posted by Deutzy | Roland,Stika SV-15 | Sunday 12 February 2012 13:22

Mesin cutting sticker Roland Stika SV-15, mesin ukuran kecil dengan kemampuan besar, sedikit lebih besar diatas mesin cutting sticker Roland Stika SV-12.

Spesifikasinya:

MODEL
 SV-15
SV-12
SV-8
Cutting method
Media-movement method
Maximum cutting area
13-3/8 (X) x 39-5/16” (Y) [340 (X) x 1000mm (Y)]
9-13/16 (X) x 39-5/16” (Y) [250 (X) x 1000mm (Y)]
6-1/4 (X) x 39-5/16” (Y) [160 (X) x 1000mm (Y)]
Acceptable sheet size*
Width: 14-1/8 to 15” (360 to 381 mm)
Width: 11 to 12” (280 to 305mm) Length: 43-1/4” (1100mm) or less
Width: 11 to 12” (280 to 305mm) Length: 43-1/4” (1100mm) or less
Width: 7-13/16 to 8-7/16” (200 to 215mm) Length: 43-1/4” (1100mm) or less
Cutting speed
7/16 to 3-7/8ips. (12 to 100 mm/sec.)
7/16 to 1-9/16ips (12 to 40 mm/sec.)
7/16 to 1-9/16ips (12 to 40 mm/sec.)
Acceptable material
PVC or label material of 0.004” (0.1 mm) or less in thickness. Total material thickness including the backing of 0.012” (0.3 mm) or less
Interface**
USB 1.1
Power supply
Dedicated AC adapter input: AC 100V +/- 10%, 50/60Hz 1.7A Output: DC 19 V 2.1 A
External dimensions
20-5/8(W) x 8-1/8(D) x 4-1/2”(H) [522(W) x 205(D) x 115(H)mm]
17-3/8(W) x 8-1/8(D) x 4-1/2”(H) [440(W) x 205(D) x 115(H)mm]
13-3/8(W) x 8-1/8(D) x 4-1/2”(H) [340(W) x 205(D) x 115(H)mm]
Power consumption
Aprox. 20W (including AC adapter)
Weight (unit only)
7.3 lb [3.3 kg]
6 lb. [2.7 kg]
4.9 lb. [2.2kg]
Acoustic noise level
60 dB (A) or less (According to ISO 7779)
Operating environment
Temperature: 41 to 104 °F [5 to 40 °C] Humidity: 35 to 80% non-condensing
Included items
AC adapter, power cord, USB cable, replaceable blade protector, blade, blade holder, pin, material for test cuts, application tape for test cuts, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10, 11,12 and Adobe Illustrator 9, 10, CS, Stika Windows Navi utility), SV-15/12/8 user’s manual

Harga Rp. 10 juta.

Minat atau ingin melihat demo mesin cutting sticker roland stika sv-15 bisa menghubungi Agung – 02190338818 / 087775123351.

Share

Roland VersaStudio BN-20

Posted by Deutzy | VersaStudio BN-20 | Monday 6 February 2012 13:45

roland versastudio bn20

Roland DGA Corp telah memperkenalkan Roland VersaStudio BN-20 ecosolvent printer / dan sekaligus sebuah mesin cutting sticker. Sebuah solusi yang lengkap, termasuk VersaWorks RIP ® perangkat lunak profesional, Roland VersaStudio BN-20 menggabungkan semua fleksibilitas dan fitur canggih teknologi terbaru Roland pencetakan inkjet ke dalam perangkat 1 perangkat ini.

VersaStudio kompatibel dengan Windows 7, Vista dan XP, dengan dukungan untuk 32 dan 64-bit sistem operasi dan software desain populer, termasuk Adobe dan CorelDRAW.

Berikut adalah spesifikasinya:

MODEL
BN-20
Printing technology Piezoelectric inkjet
Media Width 150 to 515 mm (5.9 to 20.3 in.)
Thickness Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cutting
Roll outer diameter Maximum 150 mm (5.9 in.)
Roll weight Maximum 6 kg (13.2 lbs.)
Core diameter 76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing/cutting width*1 Maximum 480 mm (18.9 in.)
Ink cartridges Type and capacity Roland ECO-SOL MAX (220 cc cartridge) or Roland aqueous pigment (FPG) ink (220 cc cartridge)
Colours Five colors (cyan, magenta, yellow, black, and metallic silver) or
Four colors (cyan, magenta, yellow, and black)
(Five colors are only ECO-SOL MAX)
Printing resolution (dpi) Maximum 1,440 dpi
Cutting blade Type Roland CAMM-1 series compatible
Blade offset 0.25 mm (9 mil)
Blade force 30 to 300 gf
Software resolution (when cutting) 0.025 mm/step
Distance accuracy (when printing) *2 *3 Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
Distance accuracy (when cutting) *2 *4 Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater
Repetition accuracy (when cutting) *2 *5 ±0.1 mm or less
Alignment accuracy for printing and cutting *2 *6 ±0.5 mm or less
Alignment accuracy for printing and cuttingwhen reloading media *2 *7 Error of less than ±0.5% of distance traveled, or
±3 mm, whichever is greater
Print heater *8 Temperature: 35°C (95°F)
Connectivity USB (compliant with Universal Serial Bus Specification Revision 2.0)
Power-saving function / Power requirements Automatic sleep feature / AC 100 to 240 V ±10 %, 1.5 A, 50 / 60 Hz
Power consumption During operation Approx. 90 W
Sleep mode Approx. 5.5 W
Acoustic noise level During operation 62 dB (A) or less
During standby 42 dB (A) or less
Dimensions / Weight 995 (W) x 585 (D) x 291 (H) mm (39.2 (W) x 23 (D) x 11.5 (H) in.) / 35 kg (79.4 lbs.)
Environmental Power on Temperature: 20 to 32°C (68 to 90°F), humidity: 35 to 80%RH (no condensation)
Power off Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no condensation)
Included items Power cord, USB cable, blade, blade holder,
Roland Software Package,
Software RIP (Roland VersaWorks), User’s Manual, etc.

Harga Rp. 74 Juta.

Minat dengan atau ingin melihat demo Roland VersaStudio BN-20 ini bisa kontak ke Agung – 02190338818 / 087775123351.

Share

Roland Camm-1 Servo GX-24

Posted by Deutzy | Camm-1 Servo GX-24,Mesin Cutting Sticker,Roland | Wednesday 11 January 2012 01:46
Mesin Cutting Sticker Roland

Mesin Cutting Sticker Roland

Siapa tidak kenal mesin cutting sticker yang satu ini, para pengusaha cutting sticker sudah pasti tidak meragukan kualitasnya lagi. Bersama dengan Graphtec dan Mimaki telah menjadi pemimpin pasaran mesin cutting sticker yang ada di dunia saat ini.

Mesin Cutting Sticker Roland CAMM-1 Servo GX-24

Model GX-24
Driving method Digital control servo motor
Cutting method Media-moving method
Loadable material width 50 to 700 mm (2 to 27-1/2 in.)
Maximum cutting area Width: 584 mm (22-15/16 in.)
Length: 24998 mm (984-1/8 in.)
Acceptable tool Special blade for CAMM-1 series
Cutting speed 10 to 500 mm/s (all directions)
Blade force 30 to 250 gf
Mechanical resolution 0.0125 mm/step (0.000492 in./step)
Software resolution 0.025 mm/step (0.000984 in./step)
Distance accuracy *1 Error of less than ±0.2 % of distance traveled, or ±0.1 mm, whichever is greater
Repetition accuracy *1*2 ±0.1 mm or less
Alignment accuracy for printing and cutting when loading printed material *1*3 ±1 mm or less for movement distance of 210 mm or less in material-feed direction and movement distance of 170 mm or less in width direction (Excluding effects of printer and/or material)
Interface USB interface (compliant with Universal Serial Bus Specification Revision 1.1), Serial (RS-232C)
Replot memory 800 Kbyte
Instruction system CAMM-GL III
Power supply Dedicated AC adapter
Input: AC 100 to 240 V ±10 % 50/60 Hz 1.7 A
Output: DC 24 V, 2.8 A
Power consumption Approx. 30 W (including AC adapter)
Acoustic noise level During operation 70 dB (A) or less (according to ISO 7779)
During standby 40 dB (A) or less (according to ISO 7779)
Dimensions 855 (W) x 315 (D) x 240 (H) mm (33-11/16 (W) x 12-3/8 (D) x 9-7/16 (H) in.)
Weight 16 kg (35 lb.)
Environment Temperature: 5 to 40°C (41 to 104°F), humidity: 35 to 80 % (no condensation)

Harga Rp. 19,5 juta

Minat bisa kontak ke 021903388181 / 087775123351 – Agung.

Share

Mesin Cutting Sticker Roland Stika SV-12

Posted by Deutzy | Mesin Cutting Sticker,Roland,Stika SV-12 | Sunday 8 January 2012 02:13
Mesin cutting sticker Roland Stika SV-12

Mesin cutting sticker Roland Stika SV-12

Produk besutan Roland untuk Mesin Cutting Sticker ukuran kecil, tetapi tanpa mengurangi kemampuannya sama sekali dalam hal presisi.

Spesifikasinya adalah sebagai berikut:

Model SV-15 SV-12 SV-8
Cutting method Friction feed
Maximum cutting range Width: 340 mm (13-3/8 in.) Length: 1000 mm (39-5/16 in.) Width: 250 mm (9-13/16 in.) Length: 1000 mm (39-5/16 in.) Width: 160 mm (6-1/4 in.) Length: 1000 mm (39-5/16 in.)
Useable material size*1 Width: 360 to 381 mm (14-1/8 to 15 in.)
Length: 1100 mm (43-1/4 in.) or less
Width: 280 to 305 mm (11 to 12 in.)
(A3 length, A4 width) Length: 1100 mm (43-1/4 in.) or less		 Width: 280 to 305 mm (11 to 12 in.)
(A3 length, A4 width)
Length: 1100 mm (43-1/4 in.) or less		 Width: 200 to 215 mm (7-13/16 to 8-7/16 in.)
(A4 length)
Length: 1100 mm (43-1/4 in.) or less
Maximum cutting speed 12 to 100 mm/sec. (7/16 to 3-7/8 in./sec.) 12 to 40 mm/sec. (7/16 to 1-9/16 in./sec.) 12 to 40 mm/sec. (7/16 to 1-9/16 in./sec.)
Useable material type*2 Vinyl chloride material (material section thickness alone is 0.1 mm or less, thickness including backing paper is 0.3 mm (0.012 in.) or less)
Label paper (thickness including backing paper is 0.3 mm (0.012 in.) or less)
Interface USB 1.1
Power supply / Power consumption Dedicated AC adapter Input: AC 100 V 10%, 50/60 Hz 1.7A Output: DC 19 V, 2.1 A / Approx. 20 W (including AC adapter)
Dimensions 522 (W) x 205 (D) x 115 mm (H)
(20-5/8 (W) x 8-1/8 (D) x 4-1/2 in. (H))		 440 (W) x 205 (D) x 115 mm (H)
(17-3/8 (W) x 8-1/8 (D) x 4-1/2 in. (H))		 340 (W) x 205 (D) x 115 mm (H)
(13-3/8 (W) x 8-1/8 (D) x 4-1/2 in. (H))
Weight 3.3 Kg (7.3 lb) 2.7 Kg (6 lb) 2.2 Kg (4.9 lb)
Acoustic noise level 60 dB (A) or less (according to ISO7779)
Operating environment Temperature: 5 to 40°C (41 to 104°F), humidity: 35 to 80% (no condensation)
Included items AC adapter, power cord, USB cable, replaceable blade protector, blade, blade holder, pin, test-use material, test-use application tape, CD-ROM, user’s manual

Harga: Rp. 8,5 jt.

Share