Mimaki CJV30-60

Posted by Deutzy | CJV30-60,Mesin Cutting Sticker,Mesin Digital Printing,Mimaki | Monday 16 January 2012 11:50

Mesin Mimaki CJV30-60 adalah sebuah mesin cutting sticker yang dilengkapi dengan fitur printing, jadi mesin ini dapat digunakan sebagai mesin print & cut sekalian.

Tinta yang digunakan adalah tinta solvent, sehingga memungkinkan untuk anda mencetak gambar yang tahan air, alias tidak luntur.

mesin cutting sticker

Berikut adalah spesifikasinya:

CJV30-
60
 CJV30-
100		 CJV30-
130
CJV30-
160
Maximum print /
cut width
610 mm (24.0″)
 1,020 mm (40.1″) 1,361 mm (53.5″) 1,610 mm (63.3″)
Print resolution 540 dpi, 720 dpi, 1440 dpi
Print mode
(Scan x Feed)		 540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Ink Kind
Exclusive solvent ink: SS21 ink, ES3 ink
Capacity 4-color mode: 440 cc cartridge x 2/color, 880 cc/color
6-color mode: 440 cc cartridge x 1/color, 440 cc/color
Media Width 620 mm (24.4″) 1,030 mm (40.5″) 1,371 mm (53.9″) 1,620 mm (63.7″)
Thickness Less than 1.0 mm
Roll weight Less than 25 kg (55 lbs.)
Roll diameter Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1″)
Maximum cutting speed 30 cm: 11.8″/s (42 cm: 1 6.5″/s at the angle of 45)
Cutting force 10-350 g
Applicable tools Cutter, Water based ball-point pen,
Oil based ball-point pen
Media cutting Cutting in Y direction by cutter on the head
Media heater Pre/print/post heater
Media take-up device Roll take-up device (Standard), inside/outside selectable
Command MRL-III , MGL-IIc2
Interface USB 2.0
Applicable standard VCCI class A, FCC class A, UL60950,
CE Marking (EMC directive, low voltage directive),
CB report
Power AC100V~240V, Less than 1,380VA
Operation environments 20°C~35°C, 35~65%RH (No condensation)
Dimensions
(W x D x H)		 1,524 x 739 x
1,424mm
(60″ x 29.1″ x
56.0″)		 1,934 x 739 x
1,424mm
(76.1″ x 29.1″ x
56.0″)		 2,289 x 739 x
1,424mm
(90.1″ x 29.1″ x
56.0″)		 2,538 x 739 x
1,424mm
(99.9″ x 29.1″ x
56.0″)
Weight 110kg
(242 lbs.)		 130kg
(286 lbs.)		 145kg
(319 lbs.)		 160kg
(352 lbs.)

Harga: $17000

Minat atau ingin melihat demo bisa hubungi: 02190338818 / 087775123351 – Agung.

Share

Mesin Cutting Sticker Mimaki CG 130SR

Posted by Deutzy | CG 130SR,Mesin Cutting Sticker,Mimaki | Monday 9 January 2012 01:20

Mesin Cutting Sticker Mimaki CG 130SR

mesin cutting sticker

CG-100SRII
 CG-130SRII
Acceptable sheet width
90-1,250mm (3.54″-49.2″)
 90-1,550mm (3.54″-61.0″)
Effective cutting area *1
1,070mm (42.1″)
 1,370mm (53.9″)
Maximum cutting speed 85 cm/s (33.5″/s) (at the angle of 45)
Adjustable speed range *2 1-10cm/s:1cm step adjustment (0.39″-3.94″ /s:0.39″ step adjustment)
10-60cm/s 5cm step adjustment (3.94″-23.6″ step adjustment)
Repeatability 0.2mm / 2m (Excluding shrinkage / expansion caused by film temperature)
Effective Repeatabilit
1,050mm x 2m
 1,350mm x 2m
Pen pressure
400g
Range of down pressure Cutter 10-20g (2g step), 20-100g (5g step), 100-400g (10g step)
Pen 10-20g (2g step), 20-100g (5g step), 100-150g (10g step)
Acceptable sheet *3 Vinyl up to 0.25mm (0.01″) thickness,
Fluorescent type vinyl, Reflective sheet
Applicable tools *4 Cutter, Water based ball-point pen,
Oil based ball-point pen, Pouncing tool
Type of command MGL-IIc / Ic1
Interface USB,RS-232C
Receiver buffer size 30MB Standard
Operational environment 5-35°C (41-95 °F), 35-75 %(Rh) Non-condensation
Power requirement AC100 V-240V, 120VA or less
Dimensions (WxDxH) 1,435mm (56.5″)x580mm (22.8″)x1,125mm (44.3″) 1,735mm (68.3″)x580mm (22.8″)x1,125mm (44.3″)
Weight (with stands) 38kg (83.8lbs) 44kg (97.0lbs)

Mesin ini memiliki ukuran 1,3 meter, cocok untuk anda yang sudah memiliki usaha yang membutuhkan mesin cutting dengan kapasitas besar, untuk CG 100SR kami tidak menyediakan.

Harga: Rp. 35 juta.

Share

Mimaki CG-60SR

Posted by Deutzy | CG-60SR,Mesin Cutting Sticker,Mimaki | Tuesday 20 December 2011 13:20

Mesin Cutting Sticker Mimaki CG-60SR

CG-60SR
Acceptable sheet width
90-740mm (roll sheet:90-640mm), 3.6″ – 29.1″ (3.6″- 25.2″)
Effective cut area*1
Normal : 586mm x 51m (23.1″ – 167′)
Expand : 606mm x 51m (23.8″ – 167′)
Maximum speed 85cm/s (33.4″/s) pen-up speed at 45°
Adjustable speed range 1-10cm/s: 1cm step (0.39″-3.94″/s: 0.39″ step)
10-60cm/s: 5cm step (3.94″-2.36″/s: 2.0″ step)
Repeatability ±0.2mm (excluding shrinkage/expansion caused by the film temperature)
Guaranteed cutting range
586mm x 2m (23.0″ – 78.7″)
Maximum cutting force
400g
Range of down pressure Cutter 10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
Pen 10~20g(2g step), 20~100g(5g step),100~150g(10g step)
Acceptable sheet width Marking film up to 0.25mm (0.001″)
thickness: Vinyl, Fluorescent type vinyl, Reflective sheet *2
Applicable tools*3 Cutter, Water based ball-point pen, Oil based ball-point pen
Command MGL-IIc
Interface USB
Receiver buffer size 30 MB (20MB when in sorting)
Operational conditions 5~35°C(41~95°F), 35~75%Rh, No-condensation
Power requirement AC100V~240V Less than 100VA
Dimensions (WxDxH) 960 x 430 x 335mm (37.8″ x 16.9″ x 13.2″)
Weight 18kg (39.7lbs.)

 

Mesin sticker cutting buatan jepang memang sudah tidak diragukan lagi kemampuannya, salah satu yang terbaik bersama dengan Graphtec dalam performanya.

Mesin cutting sticker Mimaki CG 60SR ini memiliki garansi yang cukup lama ketimbang mesin lainnya, yaitu selama 2 tahun.

Harga: Rp. 18 juta.

Minat atau ingin melihat demo bisa hubungi 02190338818 / 087775123351 – Agung.

Share